Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
12-04-2019, 02:14 PM,
#1
V-Star 1100 single Carb conversion help!
I am converting to single carburetor (BIP) system with a TM40-6 Mikuni.
Several reasons why but primarily elimination of vacuum leaks,ease of adjustment,elimination of a bunch of extra parts, and no more re-syncing
carburetors.
Io Bike has Barnett Clutch, with new frictions and steels,cobra dragster pipes, Dyna ignition, new coils and caps, E-3 plugs,K&L exhaust gaskets.
My current system is the DBAK mod, using 2 Uni Pods, and jetted 117.5 Pilot 142.5 Mains.
I've had some problems last spring steming from overfilled oil.
Everything has been disassembled, cleaned, and reassembled/filled to specs.
Had a no start/no spark issue, so tested all my electrical components and ended up replacing coils as above and main relay. No Change.
Yamaha could not(or would not) test the ECU so cheper to buy the Dyna Ignition.
Have had lots of trouble with vacuum leaks at the carburetors, even with new boots. Also fought getting a goog seal at front exhaust manifold, thus the K&L gaskets.
Well, it's snowing outside now and the new manifold and carb extension are in route, so decided today would be a good day to fertilize my brain.
Hoping I can find someone here who has done a single carb conversion
using Mikuni TM40-6 Carburetor and can give me some clues as to pilot and main jet sizing.I have already made over a dozen searches on the subject to no avail.
I'm thinking 37-45 pilot and 175-185 mains just doing simple math.
Your responses will be appreciated and will contribute to the longevity of my brain cells!
Reply
01-26-2020, 02:33 PM,
#2
RE: V-Star 1100 single Carb conversion help!
Well! No information forthcoming so with a littlr exoerimentation came up with the following:

37.5 Pilot jet
177.5 Main Jet
55 Fuel pump Nozzle

I rumbles like a harley and has much improved low end torque.
Hope this will help someone else considering a sigle carb conversion.
Reply
Possibly Related Threads...
Thread Author Replies Views Last Post
  Carb Jetting for New Pipes timjinks 0 883 08-18-2019, 10:32 AM
Last Post: timjinks
  Vance & Hines Pipes & Carb Jetting timjinks 0 396 08-18-2019, 10:11 AM
Last Post: timjinks
  2006 v star 1100 classic shuts off during ride pcuriel1211 1 2,789 08-30-2018, 03:04 PM
Last Post: Chaplain
  CARB ISSUES? jay 2 3,608 12-16-2016, 10:15 AM
Last Post: jay
  V Star 1100 fuel consumption? jmck 12 12,237 12-06-2016, 01:39 PM
Last Post: RuggedNorth
  Just purches a V star 1100 Bilzer 1 3,045 03-20-2016, 05:47 PM
Last Post: pauli466
Bullet_wrench Valve Adjustment: V-Star 1100 zag 8 20,680 08-03-2015, 02:58 AM
Last Post: fabarker
  Cleaned carb, now backfiring like a Thompson BCJamz 13 9,643 07-02-2015, 12:59 PM
Last Post: BCJamz
  08" V Star 1100 classic purchase cuyahoga 15 13,778 01-27-2015, 01:47 AM
Last Post: Dreamweaver
  Pod jetting advice v star 1100 dman17ford 2 4,694 09-30-2014, 06:56 AM
Last Post: dman17ford

Users browsing this thread:
1 Guest(s)