Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
06-22-2015, 01:15 AM,
Question on Installing V&C Cruzers on my 2000 650 Classic
So question guys. I'm installing my set of Vance and Hines Cruzers on my 2000 650 Classic, and I've ran into a problem. On the rear exhaust, when I try to insert the pipe into the rear exhaust port, it doesn't fit. The OEM exhaust slipped inside the port, but the V&Cs are the same diameter, and cause the pipe not to sit flush. For the record, the pic is without the gasket, which comes on Tuesday. That's how the exhaust pipe sits against the port, with a large gap between. Wouldn't adding the gasket cause an even larger gap? Thanks guys, hope I'm missing something silly here. [img][Image: IMAG06601_zpstukutkpw.jpg][/img]
06-22-2015, 01:43 AM, (This post was last modified: 06-22-2015, 01:51 AM by ET_Geckoe.)
RE: Question on Installing V&C Cruzers on my 2000 650 Classic
can you post the installation instructions? the gasket my be the answer here.

Found them on V&H site. Is this your Product ID: 31501?
'07 Double One Hundred Custom Black Cherry w/Ghost flames
Cobra Speedster Slashdown pipes
Barons ORK
Disabled AIS
Cobra Carb Needles
Every cage is trying to kill you so always remember, Grip it and Rip it!!!

06-22-2015, 09:42 AM,
RE: Question on Installing V&C Cruzers on my 2000 650 Classic
If you look closely you will see that the inner pipe is actually seating against the inside of the port (where the new gasket will go). It is only the flange that sits out about 3/4" or so from the port, unlike the stock exhaust which is almost flush. I don't know why V&H does it this way, but it works fine. Mine haven't leaked at all.

2011 V-Star 650 Custom (new in fall 2013)
V&H Cruzer Pipes, Memphis Shades Bat Wing, Floorboards, Highway Bars,
Locking Bags, Tail Rack, LED Signals & Aux Brake Lights, Headlight Modulator,
Brake Light Modulator, 5/8" Gel Pad Under Upholstery.
Possibly Related Threads...
Thread Author Replies Views Last Post
  question about v star 950 exhaust fusion 8 10,413 08-21-2012, 12:38 PM
Last Post: Jquinn

Users browsing this thread:
1 Guest(s)